top

SPF Roofing

The U.S. non-residential roof market accounts for approximately 60% of all U.S. roofs. Over a 30 year life span, Spray Polyurethane Foam (SPF) roof systems have proven to provide a cost savings of between 10% and 50% less on average than comparably insulated membrane roof systems.

 

Sprayed Polyurethane Foam has been used as a roofing and insulation material for over 45 years. During this time, foam roofing systems have proven to be dependable, long lasting, and very affordable. Today there are foam roofs that have been in place for decades, and by all appearances they should be able to last indefinitely as long as they are properly maintained. 

 

Spray Polyurethane Foam roofs carry a UL 790, class A Rating, which is the highest Fire Resistance Rating obtainable.

SPF Roofing
rhino coatingroof paintrhino coatingroof coating technologyrhino roof coatingroof protectionroof surface coating

Benefits of DuraTiteā„¢ Roofing Systems

• High R Value

• Seamless
• Strong Solar Reflective Index • Lightweight
• Reduce damage from high winds • Economical
• Eliminates Ponding Water • Tough
• Increase Roof Life • Flexible
• Thermal Insulation • Strong
• Water & Air Tight • Self-Flashing

DuraTiteā„¢ Roofing Coating Benefits

• Solar Reflex index greater than 78 on low sloped roofs
• Reduced structural damage caused by high winds

• Contains no formaldhyde or ozone depleting substances
• Conserve energy, reducing CO2 emissions

• Control moisture and condensation

• Effective at low and high temperatures

LEED Credits

LEED Project Credits available with DuraTite™ Roofing Systems in Building Projects:

• Sustainable Sites = 1 Point
• Energy & Atomosphere = 10 Points
• Materials & Resources = 7 Points

• Innovation & Design Process = 4 Points
• Cool Roof = 1 Point

5-Year, No Leak, Roof Coating Limited Warranty

Only State Certified General and Roofing Contractors are eligible for a Rhino Linings 5-Year, No Leak, Roof Coating Limited Warranty. The warranty is non-transferable and covers coating replacement only in the event of a leak due to deterioration as a result of ordinary weather conditions. To qualify for a Rhino Linings 5-Year, No Leak, Roof Coating Limited Warranty the following conditions must be met.

Foam Roof Applications - Rhino Acrylic Top Coat, Rhino Silicone Top Coat or Rhino Eco-Coat (aluminum polyurea top coat) material must be applied in accordance with Product Application Guide Instructions and to at least a minimum total dry film thickness of - 30 mils (dft) over Rhino SPF 2.5, 2.8 or 3.0.

Metal Roof Applications - Rhino Eco-Coat (aluminized polyurea) must be applied in accordance with Product Application Guide Instructions and to at least a minimum total dry thickness of - 20 mils (dft) over flat surfaces of metal roof and 40 mils (dft) over all fasteners and seams.

SPF Roofing: Informational Resources

ļ»æ
0808120846Find-Applicator-Button.jpg

Featured Case Study

Oil Tank Footings - Tanks


bottom